[INCH-POUND]
A-A-52476
October 20, 1993
SUPERSEDING
MIL-P-3306E
17 August 1987
MS51084C
17 January 1986
COMMERCIAL ITEM DESCRIPTION
PUMP, ENGINE PRIMING, HAND-DRIVEN,
(NONAIRCRAFT) ENGINE
The General Services Administration has authorized the use of this commercial item description (CID) as a replacement to MIL-P-3306E and MS51084C which are canceled.
ABSTRACT
This CID covers a hand operated, displacement type pump for engine priming and a replacement kit. The pump is capable of delivering 5 to 20 cubic centimeters (cc) of fuel per stroke in 5 cc increments determined by the number of sleeves installed. This pump is intended for installation in, or as auxiliaries to, the fuel systems of vehicles, and other military equipment powered by internal-combustion engines, either during production, or in the field as part of winterization or other kits. Fuel for priming maybe tank-installed to hold more volatile fuel. The replacement kit contains the engine priming pump, connecting hardware, and installation instructions.
SALIENT CHARACTERISTICS.
a. Materials. Materials shall be as specified herein. Materials not specifically designated shall be suitable for use in priming pumps, when operated over specified ranges, without any change in physical or dimensional properties that would result in operation of the units falling outside of specified limits. The use of recovered materials made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see notes).
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent by letter to: U.S. Army Tank-Automotive Command, ATTN: AMSTA-GD5, Warren, MI 48397-5000. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business