INCH-POUND
MIL-DTL-52649C
11 May 2009
SUPERSEDING
MIL-E-52649B
18 November 1992
DETAIL SPECIFICATION
ENGINE COLD STARTING AIDS, ETHER FUEL PRIMERS
MIL-E-52649B, dated 18 November 1992, is hereby reactivated and may be
used for either new or existing design acquisition.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers primer equipment for adding controlled quantities of
engine priming fuel to internal combustion engines of commercial equipment as an aid in starting at low
temperatures.
1.2 Part or Identifying Number (PIN). The PIN to be used for engine cold starting aids acquired to
this specification are created as follows:
M
52649 - A
-
III
-
2
Size/type designator (see 1.2.1)
Primer equipment type (see 1.2.1)
Cylinder capacity designator (see 1.2.2)
Specification number
M prefix
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus OH 43218-3990, or emailed to
FluidFlow@dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.daps.dla.mil.
FSC 2910
AMSC N/A
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business