MS51300F
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
0.016 |
0.41 |
0.250 |
6.35 |
2.500 |
63.50 |
4.625 |
117.48 |
0.030 |
0.76 |
0.500 |
12.70 |
3.120 |
79.25 |
7.000 |
177.80 |
.0.031 |
0.79 |
0.530 |
13.46 |
3.500 |
88.90 |
||
0.125 |
3.18 |
.0.750 |
19.05 |
3.797 |
96.444 |
||
0.130 |
3.30 |
2.020 |
51.31 |
4.500 |
114.30 |
NOTES:
1. Dimensions are in inches. Tolerances are ± .010 on decimals, ± 1° on angles.
2. Metric equivalents are given for information only.
3. All dimensions are "reference" dimensions.
4. For design feature purposes, this standard takes precedence over acquisition documents referenced herein.
FIGURE 1. Cap, fuel tank: combat vehicle, spill-proof - Continued.
REQUIREMENTS
This cap is of procurement specification MIL-C-45300, Type I. This cap is to be used with necks shown on MS35644.
Material: Retainer: Steel 1065, 1074, or 1085 as specified in ASTM-A684/A684M. After forming, retainer shall be annealed and tempered to Rockwell 40-55 C.
The chain shall conform to RR-C-271, Type II, Class 6.
Protective coating: Interior parts shall be zinc plated as specified in ASTM-8633 Type VI, Fe/Zn 5. The cover and other exterior parts shall be phosphate coated as specified in MIL-DTL-16232, type Z (zinc phosphate base), Class I.
In the event of a conflict between the text of this standard and the references cited herein. The text of this standard shall take precedence.
This standard is not intended to limit construction to features other than shown herein by dimensions, notations and referenced documents.
Part or Identifying Number (PIN).
Example of a PIN: MS51300-1 (base number) Example of a PIN: MS51300-1
Type of guide and neck (see figure 1) MS prefix and basic number
Marking shall consist of the PIN and manufacturer's identification in accordance with MIL-STD-130.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business