A-A-52476 Pump, Engine Priming, Hand-Driven, (Nonaircraft) EngineThis CID covers a hand-operated, displacement type for engine priming and a replacement kit. The pump is capable of delivering 5 to 20 centimeters (cc) of fuel per stroke in 5 cc increments determined by the number of sleeves installed. This pump is intended for installation in, or as auxiliaries to, the fuel systems of vehicles, and other military equipment powered by internal-combustion engines, either during production, or in the field as part of winterization or other kits.

Pages 1 - 2 - 3 - 4 - 5

A-A-52476

k. Exterior surface treatment. All exposed surfaces of the pump and its components shall be cleaned, treated, and painted in accordance with drawing 12369000. Unless otherwise specified (see note b), the color of topcoat shall be green 383.

l. Ozone resistance. When specified (see note b), rubber components shall be ozone resistant.

m. Identification and markings. The pump identification and markings shall consist of inlet and outlet port identification (see figure 1), the CID part number, and the manufacturer�s identification CAGE code. The replacement kit shall be marked in accordance with Army drawing 5702557. Identification and markings of pumps and replacement kits shall be permanent and legible.

QUALITY ASSURANCE PROVISIONS

a. Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).

b. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer�s own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

PRESERVATION, PACKAGING, PACKING, LABELING, AND MARKING

Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract for the engine priming pump and in accordance with Army drawing 5702557 for the replacement kit.

NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

a. Addresses for obtaining copies of referenced documents.

1. Government specification. Copies of MIL-G-3056 "Gasoline, Automotive, Combat" are available from the Navy Publications and Printing Service Office, Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.

2. Government drawings. Army drawing 5702557 "Special Packaging Instruction" and Army drawing 12369000 "Chemical Agent Resistant Coatings (CARC) Paint Systems Index" are available from U.S. Army Tank-Automotive Command, ATTN: Contracting Officer, Warren, MI 48397-5000.

b. Ordering data. Acquisition documents must specify the following:

1. Title, number, and date of this CID.

2. Issue of DODISS to be cited in the solicitation, and, if required, the specific issue of individual documents referenced.

3. Specify capacity of engine priming pump and PIN number.

4. Whether replacement kit is required.