MS90908C
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.049 |
1.2446 |
. 375 |
8.255 |
.905 |
22.987 |
3.00 |
76.2 |
.059 |
1.4986 |
. 4375 |
11.1125 |
1.00 |
25.4 |
3.440 |
87.376 |
.0625 |
1.5875 |
.625 |
15.875 |
1.940 |
49.275 |
3.500 |
88.9 |
.125 |
3.175 |
.670 |
17.018 |
2.00 |
50.8 |
6.1875 |
157.1625 |
NOTES:
1. Dimensions are in inches. Tolerances are ± 1/64 on fractions, ± .010 on decimals, ± 1° on angles.
2. Metric equivalents are given for information only.
3. All dimensions are "reference" dimensions.
4. For design feature purposes, this standard takes precedence over acquisition documents referenced herein.
5. In the event of a conflict between the text of this specification sheet and the references cited herein, the text of this specification sheet shall take precedence.
6. This document is not intended to limit construction to features other than as shown herein by dimensions,
notations or referenced documents.
FIGURE 1. Filler tube - Continued.
REQUIREMENTS:
Filler tube shall be specified on figure 1.
Strainer material shall be cloth, wire, industrial, square mesh, plain square weave, copper-zinc alloy or phosphor bronze, 60 X 60 mesh specified in ASTM-E2016.
Materials of other parts shall be steel, low-carbon 0.15% maximum, grade 1008 to 1012 HR or CR with temper 4 or temper 5 in accordance with QQ-S-698.
Optional material: ASTM-A1011/A1011M, Grade CS Type B, ASTM-A1008/A1008M, Grade CS Type B, or
ASTM-A513 Grades 1008 or 1010.
Welding rod shall be Type I in accordance with SAE-AMS6457. Resistance spot welding shall be in accordance with
AWS-D8.7 and AWS-D8.9. Arc welding shall be Type I in accordance with AWS-D1.1/D1.1M.
Solder shall be composition 40 or 50 in accordance with J-STD 004, J-STD 005, and J-STD 006 or composition 40 or
50 in accordance with ASTM-B32.
Surface shall be free from burrs and sharp edges. Protective coating prior to installation of strainer:
Assembly shall be protected with zinc coating in accordance with ASTM-A153/A153M or zinc coating
(electrodeposited) in accordance with ASTM-B633, Fe/Zn 5, Type VI.
Marking shall consist of the Part Identification Number (PIN) and manufacturer's identification in accordance with
MIL-STD-130.
Chain clip shall be in accordance with RR-C-271, Type II, Class 6, classified as an attachment, Type II is a connecting link, use of one link for the chain clip.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business