A-A-52447 Pump, Fuel, Cam-Actuated: Engine, Mechanical Diaphragm And Parts Kit, Engine Fuel PumpThis commercial item description (CID) covers requirements for mechanical fuel pumps of the cam-actuated, diaphragm type used on carburetor-fed internal combustion engines. The rated flow of the fuel pumps ranges from 10 to 50 gallons per hour (gph). Requirements for repair kite to rebuild the fuel pumps are also covered.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-52447A

b. Fuel pumps with rated flow of more than 10 gph shall be capable of self-priming and delivering not less than two fluid ounces of fuel within the first 40 cycles of operation while operating at a speed of 200 cpm.

c. The fuel pump shall be capable of meeting the performance requirements of salient characteristic d.1 while being operated at 200 cpm and under the conditions specified in a and b.

2.5 Identification and marking. Unless otherwise specified in the AED, identification and markings of fuel pump and parts kit shall be permanent and legible and shall include, as a minimum, the manufacturer’s CAGE code and part number and AED part numbers. Markings to designate the inlet and outlet ports shall also be provided.

3. QUALITY ASSURANCE PROVISIONS

3.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).

3.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

4. PRESERVATION, PACKAGING, PACKING, LABELING, AND MARKING

Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract (see 5.1, note e).

5. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

5.1 Ordering data. Acquisition documents must specify the following:

a. Title, number and date of this CID.

b. Title, number and date of the fuel pump AED and part number.

c. Whether repair parts kit is required and part number of the AED kit or manufacturer’s kit.