A-A-52447 Pump, Fuel, Cam-Actuated: Engine, Mechanical Diaphragm And Parts Kit, Engine Fuel PumpThis commercial item description (CID) covers requirements for mechanical fuel pumps of the cam-actuated, diaphragm type used on carburetor-fed internal combustion engines. The rated flow of the fuel pumps ranges from 10 to 50 gallons per hour (gph). Requirements for repair kite to rebuild the fuel pumps are also covered.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-52447A

d. Whether manufacturer’s test procedures and which ones are to be substituted for one or more of the performance verification procedures.

e. Selection of applicable level and packaging requirements.

5.2 Cross-reference data. Fuel pumps conforming to this CID are interchangeable/substitutable with fuel pumps conforming to MIL-P-45361B, dated 20 November 1985.

5.3 Metric product. The fuel pumps that are to metric dimensions will be considered on the following basis:

5.3.1 Unit conversion. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of IEEE SI10, and all other requirements of this CID are met.

5.3.2 Tolerance conversion. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable.

5.3.2.1 Rejection. The contracting officer has the option of accepting or rejecting the product.

5.4 Regulatory requirements. Recovered material is material made in conformance to section 402 of the Clean Air Act (33 U.S.C. 1342 et. seq.).

5.5 Addresses for obtaining copies of referenced documents.

5.5.1 Government documents and publications. Copies of section 402 of the Clean Air Act (33 U.S.C. 1342 et. seq.) are available from Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402or website https://www.epa.gov/.

5.5.2 Non-Government publications. Copies of IEEE SI 10 International System of Units (SI): The Modern Metric System are available from the Institute of Electrical and Electronic Engineers, 445 Hoes Lane Piscataway, NJ, 08855-1331 or website https://www.ieee.org/.