MIL-DTL-52649C
3.7 Treatment and painting. Unless otherwise specified (see 6.2), the painting of the primer
equipment shall be the supplier's standard. When specified (see 6.2), painting shall be in accordance with
the acquisition requirements.
3.8 Identification markings. Identification markings shall be in accordance with MIL-STD-130,
method optional, and shall include as a minimum the following:
a. The capacity of the metered primer fuel output as specified by the given size.
b. Contractor's name and model as applicable.
3.9 Workmanship. Components and assemblies of the primer equipment including seals,
stampings, and moldings shall be clean and free from fins, sharp edges, pits, or scratches. Each primer
assembly shall be complete and function smoothly and to its specified capacity. Each primer shall be
examined for the following defects as specified in table I.
TABLE I. Workmanship defects.
Examination
Requirement
Paragraph
Materials not as specified
3.4
Materials not resistant to corrosion and deterioration, or
3.4.1
treated to be resistant to corrosion or deterioration of the
applicable operating and storage environments
Dissimilar metals as defined in MIL-STD-889 are not
3.3
effectively insulated from each other
Contractor does not have documentation available for
3.4.2
identification of materials, material finishes, or treatment
Used, rebuilt, or remanufactured components, pieces, and
3.4.3
parts incorporated in the primer equipment
3.5.1 through
Type and size of primer equipment not as specified
3.5.7
3.5.6.1 and
Safety accessories not as specified
3.5.7.1
Treatment and painting not as specified
3.7
Identification markings not as specified
3.8
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.5).
b. Conformance inspection (see 4.6).
4.2 Inspection conditions. Unless otherwise specified, all inspections shall be performed in
accordance with the test conditions specified in the applicable test method (see 4.7).
4.3 Test equipment and inspection facilities. Test and measuring equipment and inspection facilities
of sufficient accuracy, quality and quantity to permit performance of the required inspection shall be used.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business