MIL-PRF-14442E(AT)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D381
- Existent Gum in Fuels by Jet Evaporation, Test Method
for (DoD Adopted).
ASTM D412
- Rubber Properties in Tension, Test Methods for
(DoD Adopted).
ASTM D413
- Rubber Property-Adhesion to Flexible Substrate, Test
Methods for (DoD Adopted).
ASTM D471
- Standard Test Method for Rubber Property - Effect of
Liquids (DoD Adopted).
ASTM D5486
- Standard Specification for Pressure-Sensitive Tape for
Packaging, Box Closure, and Sealing (DoD Adopted).
(Copies of ASTM publications may be obtained from the American Society for Testing
and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.3 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.3.
3.2 Design, materials, and manufacturing process. Unless otherwise specified (see 6.2),
the design, materials, and manufacturing process selection is the prerogative of the contractor as
long as all articles submitted to the government fully meet the interface and interoperability,
environmental, support and ownership, and operating requirements specified herein.
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.3 Interface and interoperability. The fuel tank shall be of flexible construction, and shall
consist generally of a nonmetallic carcass of unit construction, with openings or fittings
satisfactory for the necessary attachment of parts and accessories in accordance with applicable
drawings. Fuel tanks shall conform to the envelope dimensions, contours, fitting and mounting
interfaces as shown on applicable drawings (see 6.2).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business