INCH-POUND
MIL-DTL-45300C
20 July 2011
SUPERSEDING
MIL-C-45300B
16 February 1988
DETAIL SPECIFICATION
CAP, FUEL TANK: FOR MILITARY
COMBAT AND TACTICAL TRANSPORT VEHICLES
Inactive for new design after 22 January 1999.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers three types of fuel tank caps intended for use on military vehicles. The type I
and type II are vented, while the type III fuel tank cap is non-vented (see 6.1)
1.2 Classification. Fuel tank caps are of the following types as specified (see 6.2):
Type I Vented cap with pressure relief valve and float assembly (MS51300).
Type II Vented cap with pressure relief valve and fording valve (MS35645).
Type III Non-vented cap (MS53075).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section
does not include documents cited in other sections of this standard or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of US Military Property.
MS35644
-
Filler Neck Assembly, Fuel Tank Military Vehicles.
MS35645
-
Cap, Fuel Tank: Tactical Vehicles, Fording.
MS51300
-
Cap, Fuel Tank: Combat Vehicle, Spill Proof.
MS53075
-
Cap, Fuel Tank: Tactical Vehicle Non-Vented.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to DLA, Land and Maritime,
ATTN: VAI, P.O. Box 3990, Columbus, OH 43218-3990, or email to FluidFlow@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 2910
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business