MIL-PRF-62678B
No.
4
Output
4.6.3.1
Extreme temperature
4.6.4.1
resistance
Output
4.6.3.1
5
Output
4.6.3.1
Fuel resistance
4.6.3.4
Output
4.6.3.1
6
Output
4.6.3.1
Vibration resistance
4.6.4.3
Output
4.6.3.1
Fungus resistance
4.6.4.2
Output
4.6.3.1
7
Output
4.6.3.1
Shock resistance
4.6.4.4
Output
4.6.3.1
Corrosion resistance
4.6.4.5
Output
4.6.3.1
4.4 Conformance inspection. Conformance inspection shall include the examinations of
4.4.2 and the conformance tests of table II. Failure of any tests shall be cause for rejection.
4.4.1 Sampling plan. Unless otherwise specified (see 6.2), the sampling plan specified
herein shall be used for definitions of sampling inspection terms (see 6.4).
4.4.1.1 Lot formation. An inspection lot shall consist of all the pumps of a single type,
grade, class, and part identification number (PIN), from an identifiable production period, from
one manufacturer, from one manufacturing location, submitted at the same time for acceptance.
4.4.1.2 Sample. The sample for conformance inspection examinations and tests shall be
randomly selected from the inspection lot in accordance with table IV.
4.4.2 Examinations. Samples selected in accordance with 4.4.1.2 shall be subjected to
the examinations of table V. The acceptance number in all cases shall be zero.
4.4.3 Tests. Samples selected in accordance with 4.4.1.2 shall be subjected to the
conformance tests specified in table II. The acceptance number in all cases shall be zero.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business