A-A-52447 - Pump, Fuel, Cam-Actuated: Engine, Mechanical Diaphragm And Parts Kit, Engine Fuel Pump
This commercial item description (CID) covers requirements for mechanical fuel pumps of the cam-actuated, diaphragm type used on carburetor-fed internal combustion engines. The rated flow of the fuel pumps ranges from 10 to 50 gallons per hour (gph). Requirements for repair kite to rebuild the fuel pumps are also covered.
A-A-52460 - Filter, Fluid, Pressure-Automotive Fuel (21 Gph Filtration)
This CID covers requirements for one type of filter assembly with a coarse filtration element for use in the fuel systems of internal combustion gasoline engines and accessories.
A-A-52461 - Strainer, Sediment: Automotive Fuel (10 Gph)
This CID covers requirements for fuel filter strainers for use in the fuel system of internal combustion gasoline engines and accessories.
A-A-52468 - Gasket: Filter, Fluid, Pressure, Automotive Fuel
This CID covers a synthetic rubber gasket used in pressurized automotive fuel filters.
A-A-52470 - Filter, Fluid, Pressure And Filter Element, Fluid, Pressure-Automotive Fuel (45 Gph Filtration)
This CID covers requirements for a filter assembly with a coarse filtration element and the replacement element for use in the fuel system of internal combustion engines and accessories.
A-A-52472 - Filter, Fluid, Pressure, Automotive Fuel (10 Gph Filtration)
This CID covers requirements for a filter assembly with a fine filtration element for use in the fuel systems of internal combustion gasoline engines and personnel heaters.
A-A-52476 - Pump, Engine Priming, Hand-Driven, (Nonaircraft) Engine
This CID covers a hand-operated, displacement type for engine priming and a replacement kit. The pump is capable of delivering 5 to 20 centimeters (cc) of fuel per stroke in 5 cc increments determined by the number of sleeves installed. This pump is intended for installation in, or as auxiliaries to, the fuel systems of vehicles, and other military equipment powered by internal-combustion engines, either during production, or in the field as part of winterization or other kits.
F-P-666 - Primer, Pressure, Internal Combustion Engine (Cold Starting Aid) And Primer Cartridges
This specification covers priming equipment for adding starting fluid to internal combustion engines as an aid to starting at low atmospheric temperatures.
MIL-DTL-45300 - Cap, Fuel Tank: For Military Combat And Tactical Transport Vehicles
This specification covers three types of fuel tank caps intended for use on military vehicles. The type I and type II are vented, while the type III fuel tank cap is non-vented (see 6.1)
MIL-DTL-52649 - Engine Cold Starting Aids, Ether Fuel Primers
This specification covers primer equipment for adding controlled quantities of engine priming fuel to internal combustion engines of commercial equipment as an aid in starting at low temperatures.
MIL-DTL-62011 - Pump, Fuel, Electrically-Operated: 24-Volt Dc, In-Tank Type, General Specification For
This specification covers electrically-operated 24-volt (V), direct current (dc), in-tank fuel pumps capable of delivering 200 gallons per hour (gph) with outlet pressure at 4 pounds per square inch gauge (psig) (see 6.1).
MIL-F-20627 - Filter Assembly And Filter Elements, Fluid, Pressure (For Engines With Liquid Fuel Injection Systems)
This specification covers filter, assemblies and filter elements for installation on internal combustion engines to remove foreign material (contaminants) from the engine fuel.
MIL-F-45356 - Filter Assembly, Fluid Pressure, And Filter Element Fluid Pressure: For Gasoline Internal Combustion Engines (S/S By A-A-52472, A-A-52461, A-A-52460, A-A-52470, And A-A-52468)
This specification covers filter assemblies and replacement filter elements for use in the fuel system of gasoline engines and accessories.
MIL-M-29416 - Module, Fule Tank (Sixcon)
This specification establishes the requirements for manufacture and acceptance of the Fuel Tank Module (Sixcom).
MIL-P-16912 - Primers, Diesel Engine, Cold Starting (S/S By F-P-666)
MIL-P-3306 - Pump, Engine Priming, Hand-Driven, (Nonaircraft) Engine (S/S By A-A-52476)
This specification covers a hand-operated, displacement type pump for engine priming.
MIL-P-45328 - Pump, Fuel, Electrical: 12 And 24 Volt Dc (S/S By A-A-59535)
MIL-P-45361 - Pump, Fuel, Cam-Actuated, Engine, Mechanical Diaphragm And Parts Kit, Engine Fuel Pump (S/S By A-A-52447)
This specification covers mechanical fuel pumps of the cam-actuated, diaphragm type used on carburetor-fed internal combustion engines.
MIL-PRF-14442 - Tank, Fuel, Engine: Nonmetallic, Non-Self Sealing, For Military Vehicles
This specification covers one type of non-metallic, non-self-sealing fuel tanks (fuel cell type) for use in military tactical vehicles and combat vehicles.
MIL-PRF-62439 - Fuel Control, Main Electrohydraulic
This specification covers an electrohydraulic main fuel control used in the gas turbine engine of the M1 tank, referred to herein as "assembly." The assembly is an electrohydraulic device which converts electrical commands to fuel flow and power turbine stator (PTS) inlet guide vane (IGV) actuator flows and pressures. This assembly also contains the PTS and IGV electrical feedback components.
MIL-PRF-62625 - Valve, Fuel-Drain
This specification covers a check valve used for draining fuel.
MIL-PRF-62678 - Pump, Fuel, Electrical: 12 And 24 Volt Direct Current (Metric)
This specification covers two types of electrically operated, in-line fuel pumps for use with 12 and 24 volt direct current (Vdc) automotive electrical systems (see 6.1).
MIL-T-13467 - Tank, Fuel, Engine, Non-Metallic, Self-Sealing For Military Vehicles
MIL-T-46786 - Tanks, Fuel, Engine: General Requirements For
This specification covers five types with four classes of engine fuel tanks from 1- through 400-gallon capacity for gasoline, diesel, and multifuel (see 6.4)
MS35643 - ( Images) Gasket: Synthetic Rubber, Cap, Fuel Tank
MS35644 - ( Images) Filler Neck: Fuel Tank-Military Vehicles
MS35645 - ( Images) Cap, Fuel Tank: Tactical Vehicle, Fording
MS39254 - ( Images) Cylinder, Engine Starting (Engine Cold-Starting Aid)
MS39280 - Pump, Fuel System, Auxiliary, Electrical, 24 Volts D.C., Rated Capacity-45 Gph
MS51084 - ( Images) Pump, Manual, Engine Priming (S/S By A-A-52476)
MS51085 - ( Images) Filter, Fluid, Pressure, Automotive Fuel (10 Gph Filtration) (S/S By A-A-52472)
MS51086 - ( Images) Strainer, Sediment: Automotive Fuel (10 Gph) (S/S By A-A-52461)
MS51087 - ( Images) Filter, Fluid, Pressure-Automotive Fuel (21 Gph Filtration) (S/S By A-A-52460)
MS51088 - ( Images) Filter, Fluid, Pressure (S/S By A-A-52470)
MS51090 - ( Images) Filter Element, Fluid, Pressure-Automotive Fuel (S/S By A-A-52470)
MS51091 - ( Images) Gasket: Filter, Fluid, Pressure, Automotive Fuel (S/S By A-A-52468)
MS51300 - ( Images) Cap, Fuel Tank: Combat Vehicles, Spill-Proof
MS51321 - ( Images) Pump, Fuel, Electrical-12 And 24 Volt D.C., 25 G.P.H. Capacity (S/S By Mil-Prf-62678)
MS51325 - ( Images) Cartridge, Engine Starting (Engine Cold-Starting Aid)
MS53075 - ( Images) Cap, Fuel Tank - Tactical Vehicle, Non-Vented
MS90908 - ( Images) Filler Tube, Fuel Tank-Military Vehicles
QPL-20627-29 - Filter Assembly And Filter Elements, Fluid, Pressure (For Engines With Liquid Fuel Injection Systems) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-45328-11 - Pump, Fuel, Electrical, 12 And 24 Volts, Dc
QPL-62011 - Pump, Fuel, Electrically Operated, 24-Volt Dc, 220 Gph, 8 Psi, In-Tank Type
L-5861-1 - Valve, Shut-Off, Hydrocarbon Fuel, Type N-5
QPL-5862-1 - Valve, Shut-Off, Hydrocarbon Fuel, Type N-6
QPL-5901-2 - Valve, Shut-Off, Hydrocarbon Fuel, Type N-7
QPL-6444-3 - Adapter, Pressure Fuel Servicing, Type A-2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business